top of page

What is Slip Lining in Trenchless Technology? | Camjet

Writer: Camjet Pty Ltd
Camjet Pty Ltd
Nov 9
4 min read

Learn how slip lining rehabilitates aging pipelines without digging trenches. Explore the Push & Pull method, segmental slip lining, and key benefits.


Or excavators.

What is Slip Lining

What is Slip Lining in Trenchless Technology?


When underground pipelines age, crack, or deteriorate, digging up kilometres of roads, driveways, or critical infrastructure to replace them is no longer the only option. Slip lining is one of the oldest, most reliable, and cost-effective methods used in trenchless technology to rehabilitate damaged gravity and pressure pipelines with minimal surface disruption.

If you’re managing municipal sewer networks or industrial pipeline infrastructure, understanding how slip lining works helps you choose the most efficient pipe repair solution for your site.


What is Slip Lining?


Slip lining is a trenchless pipeline rehabilitation method where a new, continuous liner pipe of a slightly smaller diameter is inserted directly into an existing, damaged pipe (known as the host pipe).


Once the new liner pipe - typically High-Density Polyethylene (HDPE) - is positioned inside the host pipe, the space between the two pipes (the annulus) is usually filled with a low-strength grout. This annular grouting secures the new pipe in place, seals off surrounding voids, and completely restores structural integrity to the pipeline system.


How Does Slip Lining Work? Two Core Methods


Depending on site conditions, host pipe diameter, and overall project scale, contractors utilize two primary methods to insert the new liner:


1. The Continuous Push & Pull Method


For standard pipe sizes and long continuous HDPE runs, installation typically relies on a combined push-and-pull setup:


The Pull Method (Winching): A heavy-duty cable and capstan winch stationed at a receiving point (such as a manhole) pulls the fused HDPE pipe through the host pipe. A rotating pulling head is attached to the front end to prevent the pipe from twisting under tension.


The Push Method: The new liner is simultaneously pushed into the host pipe from the insertion pit using site machinery, such as a TLB (Tractor Backhoe) or an excavator fitted with a protective choker strap.


Combining both pushing and pulling forces ensures smooth insertion across long distances without overstressing the liner material.


What is Slip Lining - push and pull method
This is a Push and Pull Method, with standard plant on site, with the like of TLB’s

2. Segmental Slip Lining (For Large Diameters)


When dealing with large-diameter pipelines or constrained urban work zones where stringing long continuous lengths of pipe is unfeasible, Segmental Slip Lining is the preferred technique:


Short Pipe Segments: Individual short sections of pipe are lowered into the insertion pit sequentially.


Pipe Jacking Equipment: Using specialized hydraulic pipe jacking equipment, each segment is pushed into the host pipeline and joined to the previous section using precision mechanical or specialist joints.


This approach is ideal for deep municipal or industrial installations where the surface footprint must be strictly limited to the entry pit.


What is Slip Lining - Segmental Slip Lining
This is Segmental Slip lining, often used for bigger diameter pipes with the use of Pipe Jacking Equipment.

Pipe Jacking Equipment.


Key Benefits of Slip Lining for Pipeline Rehabilitation


  • Minimal Surface Disruption: Eliminates the need for deep longitudinal trench excavation along roadways, industrial parks, or private properties.

  • Cost & Time Efficiency: Significantly shortens project delivery schedules while slashing road reinstatement, paving, and traffic management expenses.

  • High Chemical & Structural Resistance: Utilizing robust HDPE liners ensures long-term resistance to corrosion, aggressive chemicals, and aggressive root intrusion.

  • Optimized Flow Capacity: Despite a minor reduction in cross-sectional diameter, the exceptionally smooth interior surface of modern HDPE pipe drastically lowers friction, often maintaining or even enhancing flow efficiency.


Professional Pipeline Rehabilitation & Support with Camjet


Successful slip lining requires rigorous ground preparation - including thorough pre-clearing, obstruction removal, precise insertion pit sizing, and controlled annular space grouting.

At Camjet, we provide specialized high-pressure jetting, pipeline cleaning, and pre-and post-installation CCTV inspections to ensure your trenchless pipeline rehabilitation projects run smoothly from start to finish.


Need Expert Assistance with Your Pipeline Infrastructure?

Contact the Camjet team today to discuss our specialised trenchless support and CCTV pipeline inspection services across South Africa.



Frequently Asked Questions About Slip Lining


Can slip lining be done without stopping all water flow?

Yes. In many gravity sewer applications, continuous flow can be accommodated during insertion. According to SASTT standards (Section 4.2.1.3), pulling heads used in continuous slip lining are required to be open-ended, allowing at least 50% of the existing pipeline’s full flow to pass through the head while winching is in progress.

However, for high-volume flows or critical pressure mains, an overpumping system or flow bypass plan must be documented prior to installation to route effluent safely.


Not necessarily. While inserting a smaller liner pipe into a host pipe reduces physical cross-sectional area, high-density polyethylene (HDPE) liners feature an exceptionally smooth internal surface (-factor) compared to aged, corroded, or tuberculated host pipes. Because modern HDPE significantly reduces hydraulic friction, the upgraded flow characteristics often offset or overcome the loss in diameter, maintaining or even improving net flow capacity.


The distinction comes down to pipe length, joint assembly, and site equipment:

  • Continuous Slip Lining: HDPE pipes are heat-fused on the surface into long continuous strings (conforming to SANS 10268 / SAQA standards) and winched/pushed into position through an angled insertion pit.

  • Segmental Slip Lining: Used primarily for large diameters or tight urban footprints where long pipe strings cannot be laid out. Short pipe sections are lowered into the pit one by one and pushed using hydraulic jacking equipment.

When designed and installed according to SASTT-TS-TT1 standards, a slip-lined pipeline is considered a fully structural, long-term rehabilitation solution expected to last 50 to 100+ years.

To guarantee maximum design life, strict adherence to the following is required:

  • Liner Integrity: Ensuring surface scratches or nicks do not exceed 10% of total wall thickness (Section 4.1.1.e).

  • Annular Space Grouting: Filling the space between host pipe and liner with low-viscosity, non-shrink cementitious grout to prevent movement, flotation, or outer wear (Section 4.1.2 & 4.2.7).

  • Post-Installation Testing: Complete post-lining CCTV inspections and hydrostatic/air pressure testing prior to final sign-off (Section 5.2).



Get in touch

 

Camjet - Johannesburg

 

Camjet - Durban

  

Camjet - Cape Town

Comments


bottom of page