top of page

How CIPP Lining Works: Insertion & Curing Methods | Camjet

Writer: Camjet Pty Ltd
Camjet Pty Ltd
Nov 10
3 min read

How Cured-in-Place Pipe (CIPP) lining is installed and cured. Learn about water/air inversion, pull-in methods, UV curing, and robotic lateral cutters.


How CIPP Lining Works

How Does CIPP Work? Two Primary Insertion & Curing Methods


In our previous post, we covered what Cured-in-Place Pipe (CIPP) lining is and why it has become the preferred trenchless method for repairing underground gravity sewer and stormwater lines.


Now, let's examine the technical process behind how CIPP is installed into damaged host pipelines, how liquid thermosetting resin is cured into a rigid pipe, and how lateral branch connections are restored without excavation. (How CIPP Lining Works)


Step 1: CIPP Insertion Methods (Inversion vs. Pull-In)

Depending on site access, pipe diameter, and liner material, contractors install CIPP liners using two primary methods:


1. The Inversion Method (Water or Air Pressure) - How CIPP Lining Works


The Process: The resin-impregnated tube is attached at an entry access point (such as a manhole or launch pit). Using a hydrostatic column of water (scaffold tower) or air pressure from an air launcher/drum, the liner is turned inside out (inverted) as it travels down the pipeline.


How It Fits: As it flips inside out, the resin-bearing side is pressed firmly against the internal walls of the host pipe, conforming tightly to bends, minor offsets, and structural irregularities.


How CIPP Lining Works

2. The Pull-In Method


The Process: A protective sliding foil is first winched along the invert (bottom) of the host pipe to reduce friction and prevent outer liner abrasion. The resin-impregnated liner is then winched continuously through the pipe from entry to exit.


Inflation: Once positioned, the tube is inflated with compressed air or water to expand the liner against the host pipe walls prior to curing.


Step 2: Curing Technologies (Setting the Resin)

After the liner is inserted and pressurised against the host pipe walls, it must be cured (polymerised) to convert the liquid resin into a hard, structural thermoset solid. CIPP relies on four main curing methods:


Hot Water Curing: Hot water is circulated through the inverted liner via a portable boiler unit, gradually raising the water temperature to trigger the exothermic chemical curing cycle.


Steam Curing: Controlled steam is injected under pressure, delivering rapid, even heat transfer across the full length of the liner.


Ultraviolet (UV) Light Curing: A train of UV lamps or LEDs equipped with high-definition CCTV cameras is winched through an inflated glass-fibre liner at a calculated speed, instantly curing the resin with UV light energy.


Ambient Curing: Uses specially catalysed resins that harden naturally at outdoor temperatures, typically used for smaller diameter lines or short localised spot repairs.


Step 3: Re-establishing Lateral Branch Connections

Because CIPP liners run continuously from manhole to manhole, they temporarily cover side connections (such as private property drain lines or branch sewers).

Once the liner has cured and cooled down, active connections are reopened internally without digging up streets, driveways, or yards:


  1. A robotic cutter equipped with high-resolution CCTV cameras and light heads is driven inside the newly lined pipe.

  2. The operator locates the dimple created at each branch connection point.

  3. The robotic cutter precision-carves smooth openings at each connection, bevelling the edges so paper, solids, or debris cannot snag.


Professional Pipeline Cleaning & CCTV Support with Camjet


Before any CIPP installation or robotic reinstatement can take place, pipelines must be thoroughly cleaned of silt, grease, heavy roots, and encrustations, followed by precise CCTV video inspection.


At Camjet, we specialise in heavy-duty pipe cleaning, root removal, and high-definition CCTV camera surveys to ensure your trenchless rehabilitation projects are executed accurately.


Planning a Trenchless Pipe Lining Project in South Africa?

Contact Camjet today for specialised CCTV inspections, pipe cleaning, and trenchless prep work.


Frequently Asked Questions (FAQs) CIPP Lining


What is the difference between Hot Water, Steam, and UV Curing?

Hot water and steam use thermal heat transfer to cure traditional felt/polyester liners. UV light curing uses targeted light energy to instantly polymerize UV-sensitive resins in glass-fibre reinforced liners—offering rapid curing times, lower energy consumption, and real-time camera monitoring throughout the cure cycle.

Branch connections are restored internally using remotely operated robotic lateral cutters guided by real-time CCTV cameras. The cutter precisely removes the liner material covering the branch opening and bevels the edges smoothly to allow unhindered drainage.

Yes. Flexible CIPP liners—especially when installed using the inversion method—conform seamlessly to minor bends, diameter variations, and joint offsets within the host pipe.



 

Camjet - Johannesburg

 

Camjet - Durban

  

Camjet - Cape Town

Comments


bottom of page